How to identify good submersible pumps

Everyone requires a commodity that will effectively meet their personal needs. In the case of submersible pumps, one must look for those that provide the best service and are long-lasting.

What is a submersible pump?

Submersible pumps are used to remove excess water from construction sites or flooded basements. They are so-called because they are intended to be submerged in fluid. They are also known as electric submersible pumps. They have a lot of horsepower and are primarily used to drain water safely.

A submersible pump can pump water from a well up to one hundred and fifty feet away. However, factors such as size and depth will have an impact. For example, if you have a large wall, you can pump water from a long distance, but if it is small, you cannot pump as much water.

Advantages of submersible pumps

They are more effective because they push water to the surface rather than pulling it out, which requires less power.

They have a hermetically sealed motor in the pump casing, ensuring that water never touches the electrical component.

Pumps will work without a pressure tank as they are automatic pumps fitted with a constant pressure controller, so the pumps start on demand. A pressure tank is recommended, particularly when you have a shower or a toilet when the pump rarely operates at 100%. These advantages greatly influence the submersible pump price in Kenya.

Disadvantages of submersible pumps

Pumps help toilets flush and drain, but nappy wipes, antibacterial wipes, wet wipes, makeup remover, and disinfectant wipes can kill them.

Causes of submersible pump failure

  • Dry running- This occurs when the water level falls to the stage where the pump cannot draw a sufficient amount of water, causing a disturbance in the water.
  • Cable damage
  • Deadhead
  • Specific gravity

The effective and popular uses

Pumping sewage- they are best suited for septic tank pumping. Fluids are transferred to storage tanks via hoses and then treated.

Industrial pumping is frequently used to remove excess water from construction sites or flooded basements.

Oil industries can be used to pump oil from the ground to treatment and holding facilities above ground in both inland and offshore wells.

Borehole pumps are used when it is necessary to drill a deep hole for water in a home. A submersible pump can efficiently pump water. They can pump water to hold tanks and houses from such great depths.

How long can it run?

These water pumps can typically run continuously for six to twenty-four hours, depending on the amount of rain/water and the quality of the pump. The aftermath of heavy rains or even flooding places a greater demand on your pump, which keeps your home’s low areas dry.

Factors to consider before purchasing a pump

The most crucial factor to consider is the type of water- while purchasing, you must identify the type of water you want to pump.

  • Outlet size
  • Cooling system
  • Discharge rate
  • Discharge height

How to tell if your pump is not working

  • Decrease in water pressure
  • Air spitting from the faucets
  • Pumping sand and sediments
  • Water quality change
  • The water pump cycle on and off constantly
  • Loud, unusual sounds
  • High electricity bills

In conclusion, as you buy a submersible pump, ensure that you know what you are looking for and how effective it will suit your needs.

Related Articles

Leave a Reply

Back to top button